Updating The Firmware - Sirona inEos X5 Operating Instructions Manual

6 Initial startup
6.6 Updating the firmware
30
6.6

Updating the firmware

In order to update the inEos X5 firmware, proceed as follows:
"Devices"
1. Click the
2. Click on the icon of inEos X5.
"Update Firmware"
3. Click on
4. Switch inEos X5 off at the main switch.
5. Then simply proceed as prompted by the inLab software.
 The inEos X5 firmware will be updated. The percentage of
completed progress is displayed.
IMPORTANT
Do not disconnect the unit from the power supply
During the firmware update, ensure that the unit is not disconnected
from the power supply.
6. Once the update is complete, confirm the message with
switch off the inEos X5.
7. Turn the inEos X5 back on.
"Continue"
8. Click on
with the inLab SW.
Sirona Dental Systems GmbH
Operating Instructions inEos X5
icon in the system menu.
.
in order to exit the configuration and continue
D3586.201.01.06.02 11.2016
"Ok"
and
64 17 096 D3586