Child-Restraint System Suitability For Various Seat Positions Table - Mazda CX-3 Owner's Manual

Child-Restraint System Suitability for Various Seat
Positions Table
(Europe and countries conforming to the UNECE 16 regulation)
Provided information in the table shows your child-restraint system suitability for various
seating position. For installation suitability of other manufacturer child-restraint system,
carefully consult the manufacturer's instructions which accompany the child-restraint
system.
When installing a child-restraint system, the following points must be observed:
If the child-restraint system does not fi t into the seatback because of the head restraint,
      
adjust the head restraint or remove the head restraint so that the child-restraint system fi ts
into the seatback. However, when installing a booster seat, always install the vehicle head
restraint to the seat where the booster seat is installed.
Refer to Head Restraints on page 2-13 .
 
When installing a child-restraint system to the rear seat, adjust the front seat position so
      
that the front seat does not contact the child-restraint system.
Refer to Seat Operation on page 2-5 .
 
When installing a child-restraint system came equipped with a tether, remove the head
      
restraint.
Refer to Head Restraints on page 2-13 .
 
ISOFIX anchor-secured child-restraint systems
When installing a child-restraint system to the rear seat, refer to the child-restraint system
manufacturer's instructions and the Using ISOFIX Anchor on page 2-38 .
Mass group
Carrycot
GROUP 0 Up to 10 kg
(less than 22 lb)
GROUP 0 Up to 13 kg
(less than 29 lb)
Size
Fixture
Class
F ISO/L1
G ISO/L2
(1)
E ISO/R1
(1)
E ISO/R1
D ISO/R2
C ISO/R3
(1)
Seat Positions
Vehicle ISOFIX
positions
Rear seat (centre)
Rear seat
(outboard)
X
X
X
IL
X
IL
IL
IL
X
Essential Safety Equipment
Child Restraint
Front passenger
seat (outboard)
X X
X X
X X
X X
X X
X X
X X
X X
X X
2–33