Mazda CX-3 Owner's Manual page 90

Before Driving
Doors and Locks
Function
number
All the doors and the liftgate lock
automatically when the vehicle speed
3 (Factory is about 20 km/h (12 mph) or more.
Setting) All the doors and the liftgate unlock
when the ignition is switched from
ON to Off.
When the ignition is switched ON
and the selector lever is shifted from
4 park (P) to any other gear position,
all the doors and the liftgate lock
automatically.
When the ignition is switched ON
and the selector lever is shifted from
park (P) to any other gear position,
all the doors and the liftgate lock
5 automatically.
When the selector lever is shifted to
park (P) while the ignition is switched
ON, all the doors and the liftgate
unlock automatically.
All the doors and the liftgate lock
automatically when the vehicle speed
is about 20 km/h (12 mph) or more.
6 When the selector lever is shifted to
park (P) while the ignition is switched
ON, all the doors and the liftgate
unlock automatically.
*1 Other settings for the auto door lock function are
available at an expert repairer, we recommend an
Authorised Mazda Repairer. For details consult
an expert repairer, we recommend an Authorised
Mazda Repairer. Refer to Personalisation Features
on page 9-13 .
Settings can be changed using the
following procedure.
1. Safely park the vehicle. All doors must
remain closed.
2. Switch the ignition ON.
3. Press and hold the lock side of the
door-lock switch within 20 seconds of
switching the ignition ON, and make
sure a beep sound is heard about eight
seconds afterwards.
3–18
Function
*1
4. Refer to the auto lock/unlock function
setting table, determine the function
number for the desired setting. Press
the unlock side of the door-lock switch
the same number of times as the
selected function number (Ex. If you
select function 2, press the unlock side
of the switch only 2 times).
5. Three seconds after the function setting
has been changed, a beep sound will
beep in the amount of the selected
function number. (Ex. Function number
3 = 3 beep sounds)
Current Function Number
Press unlock side of
lock switch once
Function Number 1
Press 2 times
Function Number 2
Press 3 times
Function Number 3
Press 4 times
Function Number 4
Press 5 times
Function Number 5
Press 6 times
Function Number 6
Press 7 times
Cancel setting
NOTE
The doors cannot be locked or
   
unlocked while the setting function is
being performed.
The procedure can be cancelled by
   
pressing the lock side of the door-
lock switch.
Press lock side of
lock switch
Cancel setting
Wait for 3 second
Function set (The
number of beeps
heard is the same as
the selected function
number)