Mazda CX-3 Owner's Manual page 121

To cancel the intrusion sensor, press
the intrusion sensor cancel button on
the transmitter within 20 seconds after
pressing the lock button.
The hazard warning lights will fl ash three
times.
NOTE
To reactivate the intrusion sensor,
   
turn off the armed theft-deterrent
system and then rearm it.
The intrusion sensor is operational
   
when the theft-deterrent system
is armed. To cancel the intrusion
sensor, press the intrusion sensor
cancel button each time the theft-
deterrent system is armed.
To Turn Off an Armed System
An armed system can be turned off using
any one of the following methods:
Pressing the unlock button on the
      
transmitter.
Starting the engine with the push button
      
start.
(With the advanced keyless function)
      
Pressing a request switch on the doors.
     

The hazard warning lights will fl ash twice.
NOTE
When the doors are unlocked by
pressing the unlock button on the
transmitter while the theft-deterrent
system is turned off, the hazard warning
lights will fl ash twice to indicate that the
system is turned off.
To Stop the Alarm
A triggered alarm can be turned off using
any one of the following methods:
Pressing the unlock button on the
      
transmitter.
Starting the engine with the push button
      
start.
(With the advanced keyless function)
      
Pressing a request switch on the doors.
     

Pressing the electric liftgate opener
     

while the key is being carried.
The hazard warning lights will fl ash twice.
Before Driving
Security System
3–49