Mazda CX-3 Owner's Manual page 413

Pairing a Bluetooth
has a four-digit PIN code
1. Using the audio control dial, select
the pairing mode " PAIR DEVICE "
in the " BT SETUP " mode. (Refer to
"Bluetooth audio device set-up" for
®
details.)
2. Press the audio control dial to
determine the mode.
After " ENTER PIN " is displayed on
the audio display for three seconds,
" PIN 0000 " is displayed and the PIN
code can be input.
3. Input the PIN code of your Bluetooth
audio device by pressing channel preset
buttons 1 to 4 while " PIN 0000 " is
displayed.
Press channel preset button 1 to input
the fi rst digit, 2 for the second, 3 for the
third, and 4 for the forth. For example,
if the PIN code were "4213", press
channel preset button 1 four times (1,
2, 3, 4), button 2 twice (1, 2), button
3 once (1), and button 4 three times
(1, 2, 3). If the " PIN 0000 " display
disappears before fi nishing the PIN
code input, repeat the procedure from
Step 1.
NOTE
Some devices accept only a particular
pairing code (Usually, "0000" or
"1234").
If pairing cannot be completed, refer
to the owner's manual of your mobile
device, and try those numbers if
necessary.
4. Press the audio control dial while the
input PIN code is displayed.
" PAIRING " fl ashes on the display.
Audio Set [Type A (non-touchscreen)]
audio device which
®
5. Operate the Bluetooth
and set it to the pairing mode while
" PAIRING " is fl ashing.
6. When the pairing is completed, " " and
" PAIR SUCCESS " are displayed after
about 10-30 seconds, after which
" PAIR SUCCESS " continues to be
displayed for three seconds, and then
the unit returns to the normal display.
NOTE
Some Bluetooth
   
a certain amount of time before the
®
" " symbol is displayed.
If the pairing failed, " Err " fl ashes for
   
three seconds.
Pairing cannot be performed while
   
the vehicle is moving. If you attempt
to perform pairing while the vehicle
is moving, " PAIR DISABLE " is
displayed.
If seven Bluetooth
   
have already been paired to the
vehicle, pairing cannot be performed
and " MEMORY FULL " is displayed.
Delete one paired device to pair
another one.
Interior Features
audio device
®
audio devices need
®
® audio devices
5–55