Mazda CX-3 Owner's Manual page 627

Hide thumbs Also See for CX-3:

Table of Contents

7. Insert the jack lever and attach the

wheel brace to tyre jack.

8. Turn the jack handle clockwise and

raise the vehicle high enough so that

the spare tyre can be installed. Before

removing the wheel nuts, make sure

your Mazda is ﬁ rmly in position and

that it cannot slip or move.

Do not jack up the vehicle higher than

is necessary:

Jacking up the vehicle higher than

is necessary is dangerous as it could

destabilize the vehicle resulting in an

Do not start the engine or shake the

vehicle while it is jacked up:

Starting the engine or shaking

the vehicle while it is jacked up is

dangerous as it could cause the vehicle

to fall off the jack resulting in an

Never go under the vehicle while it is

Going under the vehicle while it is

jacked up is dangerous as it could

result in death or serious injury if the

vehicle were to fall off the jack.

9. Remove the wheel nuts by turning

them anticlockwise; then remove the

wheel and centre cap.

If Trouble Arises

Chapters

Table of Contents