Mazda CX-3 Owner's Manual page 342

When Driving
Rear View Monitor
NOTE
If water, snow, or mud is stuck on the camera lens, wipe it off using a soft cloth. If it
   
cannot be wiped off, use a mild detergent.
If the camera temperature changes rapidly (Hot to cold, cold to hot), the rear view
   
monitor may not operate correctly.
When replacing the tyres, consult an expert repairer, we recommend an Authorised
   
Mazda Repairer. Replacing the tyres could result in deviation of the guide lines which
appear on the display.
If the vehicle's front, side, or rear has been involved in a collision, the alignment of
   
the rear view parking camera (location, installation angle) may have deviated. Always
consult an expert repairer, we recommend an Authorised Mazda Repairer to have the
vehicle inspected.
If "No Video Signal Available" is indicated in the display, there could be a problem
   
with the camera. Have your vehicle inspected at an expert repairer, we recommend an
Authorised Mazda Repairer.
Rear View Parking Camera Location
Rear view parking camera
Switching to the Rear View Monitor Display
Shift the shift lever to R with the ignition switched ON to switch the display to the rear view
monitor display.
NOTE
When the shift lever is shifted from R to another shift lever position, the screen returns to
the previous display.
4–204