Mazda CX-3 Owner's Manual page 550

Maintenance and Care
Owner Maintenance
When choosing an oil, consider the temperature range your vehicle will operate in before
the next oil change.
Then select the recommended viscosity from the chart.
Using oils of viscosity besides those recommended for specifi c temperature ranges
   
could result in engine damage.
(SKYACTIV-D 1.5)
    
SKYACTIV-D 1.5 uses specifi ed oil. Please confi rm the specifi cation in owner's

manual. If engine oil other than the specifi ed oil is used, the Diesel Particulate
Filter effective period of use will be shortened or the Diesel Particulate Filter may
be damaged.
NOTE
(SKYACTIV-G 2.0)
It is normal for all engines to consume engine oil under normal driving conditions.
    
Engine oil consumption may be as high as 0.8 L/1,000 km (1 L/800 miles). This may

be as a result of evaporation, internal ventilation or burning of the lubricating oil in
the working engine. Oil consumption may be higher when the engine is new due to
the running-in process. Oil consumption is also dependant on engine speed and engine
load. Under extreme driving conditions, oil consumption may be higher.
(SKYACTIV-D 1.5)
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
    
reset as soon as possible. Otherwise the wrench indicator light or engine oil warning
light may turn on. To reset the engine control unit, consult an expert repairer, we
recommend an Authorised Mazda Repairer or refer to the vehicle engine control unit
reset procedure on page 6-25 .
Inspect the engine oil level periodically. When inspecting the engine oil, if the engine

oil level is exceeds the "X" mark on the dipstick, replace the engine oil. This should
be done by an expert repairer, we recommend an Authorised Mazda Repairer. When
replacing the engine oil, inspect the oil level using the oil dipstick and refi ll so that the
engine oil level is within the range between MIN and MAX as shown in the fi gure.

MIN MAX
6–24
CAUTION
X Mark