Mazda CX-3 Owner's Manual page 388

Interior Features
Audio Set [Type A (non-touchscreen)]
Auto memory tuning (Without Radio
Data System (RDS))
This is especially useful when driving in
an area where the local stations are not
known.
Press and hold the auto memory button
( ) for about 2 seconds until a beep
is heard; the system will automatically
scan and temporarily store up to 6 stations
with the strongest frequencies in each
selected band in that area.
After scanning is completed, the station
with the strongest frequency will be tuned
and its frequency displayed. Press and
release the auto memory button (
to recall stations from the auto-stored
stations. One stored station will be
selected each time and its frequency and
channel number will be displayed.
NOTE
If no stations can be tuned after scanning
operations, " A " will be displayed.
5–30
*Some models.
Radio Data System (RDS)
NOTE
The radio data system (RDS) does
not function if it is out of the system's
service coverage area.
Alternative frequency (AF)
AF functions on FM stations. Press the
menu button (
mode to turn it on and " AF " will be
displayed. If the radio reception of the
current station weakens, the system
switches to an alternative station
)
automatically.
If you wish to continue a regional
programme, press the menu button
( ) and select the REG mode to turn
it on. " REG ON " is displayed. To cancel
it, press the audio control dial and select
the REG mode to turn it off. " REG OFF "
is displayed.
Traffi c announcement (TA)
If the traffi c announcement button (
pressed, the unit switches to TA mode and
" TA " is displayed.
If a TA broadcast is received while in the
TA mode, the TA broadcast intercedes
even while using other functions (FM,
CD, USB device, AUX, or BT audio), and
" Traffi c Info " is displayed.
During a TA broadcast, press the traffi c
announcement button (
broadcast and return to the previous mode.
*
) and select the AF
) is
) to end the