Mazda CX-3 Owner's Manual page 507

Operating Tips for CD Player
Condensation phenomenon
Immediately after turning on the heater
when the vehicle is cold, the CD or
optical components (prism and lens) in
the CD player may become clouded with
condensation. At this time, the CD will
eject immediately when placed in the unit.
A clouded CD can be corrected simply by
wiping it with a soft cloth. Clouded optical
components will clear naturally in about
an hour. Wait for normal operation to
return before attempting to use the unit.
Handling the CD player
The following precautions should be
observed.
Do not use deformed or cracked CDs.
      
The disc may not eject resulting in a
malfunction.
Do not use non-conventional discs such
      
as heart-shaped, octagonal discs, etc.
The disc may not eject resulting in a
malfunction.
If the memory portion of the CD is
      
transparent or translucent, do not use the
disc.
A new CD may have rough edges on its
      
inner and outer perimeters. If a disc with
rough edges is used, proper setting will
not be possible and the CD player will
not play the CD. In addition, the disc
may not eject resulting in a malfunction.
Remove the rough edges in advance
by using a ball-point pen or pencil
as shown in the following fi gure. To
remove the rough edges, rub the side of
the pen or pencil against the inner and
outer perimeter of the CD.
When driving over uneven surfaces, the
      
sound may jump.
Interior Features
Appendix
Transparent
5–149