Mazda CX-3 Owner's Manual page 155

NOTE
Engine restarts automatically while engine idling is stopped
Under the following conditions, the engine restarts automatically.
The i-stop OFF switch is pressed until the beep sounds.
    
The air conditioner is operated with the airfl ow mode dial in the
   
(Automatic air-conditioning)
   
The temperature setting dial of the air conditioner is set to the maximum heating/
      
maximum cooling (A/C ON).
The cabin temperature is largely different from the set temperature of the air
      
conditioner.
The brakes are released slightly on a slope and the vehicle begins to move.
    
Two minutes have elapsed since the idling was stopped.
   
The battery power is depleted.
   
(Automatic transaxle)
   
The accelerator pedal is depressed with the selector lever in the D or M (not in
      
second gear fi xed mode) position.
The selector lever is shifted to the R position.
      
The selector lever is shifted from N or P position to D or M (not in second gear fi xed
      
mode) position.
The steering wheel is operated with the selector lever in the D or M (not in second
      
gear fi xed mode) position.
The selector lever is in the M position and the second gear fi xed mode is selected.
      
(Except European model)
    
(Manual transaxle)
      
With the shift lever in the neutral position, the driver's seat belt is unfastened and the
 
driver's door is opened.
(Automatic transaxle)
      
With the selector lever in the N or P position, the driver's seat belt is unfastened and

the driver's door is opened.
When Driving
Start/Stop Engine
position.
4–17