Agilent Technologies B1500A Training Manual page 66

Simplifying the Prober Connection
Use single triax for basic MOS FET measurements
One triax on each Force line
Leave the Sense lines open...no cable connected
Use triax bulkhead feedthru adapters on the prober
Use a probe holder with a triaxial connector
Use a probe holder than accommodates replaceable
probe tips (inexpensive repair)
The next section sheds light on the confusing topic of connection to the device under test. Without
proper considerations, noise, capacitance, sense resistance, or inductance will result in unacceptable
measurement error.
5-46
Module 5
Basic Measurement