Typical Power Consumption - ETC ColorSource Linear Installation Manual

ETC Installation Guide
ColorSource Linear v1.5

Typical power consumption

Linear 1
Idle Power/Current
Direct at Full/Current
Linear 2
Idle Power/Current
Direct at Full/Current
Linear 4
Idle Power/Current
Direct at Full/Current
Accessories
You can use several half-meter optional accessories with ColorSource Linear
fixtures, including:
• Secondary lenses (horizontal, vertical, and round)
• Barn doors (7414K1020)
• Louver (7414K1019)
For information on installing secondary lenses, see
page 14
on
Accessories for Linear 2 and Linear 4
For the Linear 2 and Linear 4 fixtures, order one accessory for each 0.5 meter
segment (cell) of the fixture. For example, for a Linear 2 fixture, order two
barn door accessory kits to fit the full length of the fixture.
Spacers for secondary lenses are included with the fixture. Use these spacers
to hold the accessories in position when multiple lenses are used in the
Linear 2 and Linear 4 fixtures. The spacers are positioned between the
0.5 meter lenses.
Contact your local dealer for more information.
ColorSource Linear v1.5
100V
1.63W/0.03A
107W/1.07A
100V
2.86W/.06A
210.83W/2.12A
100V
5.28W/.11A
424.17W/4.27A
.
Page 3 of 16
120V
1.55W/0.03A
105W/0.88A
120V
2.98W/.06A
208.67W/1.75A
120V
5.24W/.11A
419.33W/3.52A
Installing secondary lenses
230V
1.43W/0.03A
104W/0.46A
230V
2.56W/.06A
204.5W/.91A
230V
4.65W/.12A
409.17W/1.82A
ETC