Static Route - Ipv4 - D-Link COVR-1900 User Manual

Section 3 - Configuration
In the Features menu on the bar at the top of the page, click Static Route to define custom routes, controlling how data
traffic is moved around your network.
To configure the Static Route IPv6 settings, click the IPv6 link. Refer to Static Route - IPv6 on page 78
Click Save at any time to save the changes you have made on this page.
If you wish to remove a route, click on the trash can icon in the Delete column. If you wish
to edit a route, click on the pencil icon in the Edit column. If you wish to create a new route,
click the Add Route button.
If you clicked on Edit or Add Rule, the following options will appear:
Enter a name for the rule.
Name
Enter the IP address of packets that will take this route.
Destination Network
Enter the subnet mask of the route.
Mask
Enter your next hop gateway to be taken when this route is
Gateway
used.
Enter a route metric value ranging from 0 to 15. This value
Metric
indicates the cost of using this route.
Select the interface that the IP packet must use to transit out
Interface
of the router when this route is used.
D-Link COVR-1900 User Manual

Static Route - IPv4

77