Console Instructions - DENTSPLY Clamus DUAL Manual

Console Instructions

Turning the device on:
• Press the Power On/Off button located on the front panel.
• Power is applied and removed to the device by alternately pressing
and releasing this switch.
• The left side of the console keypad controls the Pack handpiece, while
buttons on the right side control Flow handpiece. To increase or
decrease settings use the up and down arrow buttons.
Activating either side of the device:
• Press the handpiece cuff or any button for the Pack or Flow side of
the console.
• The blue LED indicator at the top of the device will light indicating
which side is active.
• At initial power on, the Pack side of the device is turned on by
default.
• The last used settings are retained in memory.
Heating Flow While Using Pack:
The Flow handpiece can be heated while the Pack handpiece is in use:
• Activate the Flow side, set the desired temperature, then switch back
to the Pack side.
• The Flow temperature LED will continue to flash as it heats to the
desired setting.
• Once the setting is achieved, the LED will remain lit.
11