Resetting The Speakerphone With The Softkeys (When Powering Up The Voice Terminal) - AT&T DEFINITY User Manual

Resetting the Speakerphone with the Softkeys
(When Powering Up the Voice Terminal)
When you first power up the voice terminal, the following display appears.
Begin
When you reset the speakerphone on your voice terminal, you hear a set of tones as
the speakerphone performs an acoustic test of the environment. When the tones
stop, your speakerphone has finished adjusting itself for optimal performance and is
ready for use. For more information about the Reset Speakerphone feature, see
"Reset Speakerphone" in the section Voice Feature Procedures later in this guide.
3 To use the Priority Calling feature, press the softkey
below PCall and then dial the extension
Note: When the feature is activated, after the
display screen shows you the digits you are dialing,
an arrow appears above the feature, as in the
example below. If there is not an arrow above the
feature, the feature is off.
CFrwd CPark
When both parties hang up from the call, the arrow
above PCall (showing feature status indication)
disappears.
PLEASE RESET SPKR.
PCall
Excl TmDay
Cancel
14