Using The Display, Softkeys And Display Control Buttons; Entering Softkey Mode And Viewing The Three Feature Option Screens - AT&T DEFINITY User Manual

Using the Display, Softkeys and
Display Control Buttons
The following information will help you use the display, the softkeys, and the display
control buttons on your 8434 voice terminal.
The softkeys are the five keys labeled with arrows ( [
display. The four display control buttons, labeled [
Next → →
and [ ] are located under the softkeys. Figure 2 shows the location of the
softkeys in relation to the display above the softkeys and the display control buttons
below them.
Figure 2. The Display, Softkeys, and Display Control Buttons

Entering Softkey Mode and Viewing the Three Feature Option Screens

There are three separate feature option screens. Each of these screens allows you to
select from five different features.
You can enter Softkey Mode by pressing the display option button labeled [
The following is an example of a feature option screen.
LWC
The top line of each feature option screen shows you the status of each of the five
features. An arrow appears above the name of a feature if that feature is active. If
there is no arrow above the feature, the feature is not active. In the above example,
the Automatic Callback feature is active because there is an arrow above that
feature name.
Note: If the feature requires you to dial a telephone number or extension, such as
Call Forwarding, you will temporarily see the digits you are dialing, rather than the
arrow, above the feature name.
CnLWC Cnslt AutCB
] ) located directly below the
← ← Prev
] , [ ] , [
Menu Exit
Display
Softkeys
Display
control
buttons
Timer
] ,
] .
Menu
11