Device Installation - Novatel MT 4000 User Manual

Device Installation

The MT 4000 case includes molded anchor points for mounting as shown in the figure below.
Always mount the device with the correct side facing skyward as shown in the figure below.
Ground should be connected first. Failure to connect ground to the MT 4000
before connecting auxiliary devices may result in damage to the attached I/O
device.
Before connecting to any auxiliary I/O device, you must apply power to the MT
4000 by moving the Battery Power Switch to the ON position. Failure to apply
power to the MT 4000 before connecting auxiliary devices may result in damage
to the attached I/O device.
Figure 3-8 MT 4000 Mounting Anchors
21 novatelwireless.com