Verifying Server Connectivity - Novatel MT 4000 User Manual

Step 4: Configure the modem to talk to the Novatel Wireless M2M Test Server.
This example will use the following information:
--Modem ID/name = "My_MT_Test"
--Remote Server IP address = http://apitest.nvtl.com/UDPAPP/
--Remote Server IP port = 1721
The following commands listed below are how the device should be programmed to
communicate with the Novatel Wireless M2M Test server.
AT$MDMID="My_MT_Test"
AT$FRIEND=1,1,"apitest.nvtl.com"
AT$UDPAPI=,1721
AT$WAKEUP=1,1
AT&W
Giving the modem a unique name using AT$MDMID and by combining with a
wakeup message allows the server to associate a Public IP address with a specific
modem, and can create an opportunity where the server can send commands to
the modem.

Verifying Server Connectivity

For the following tests, ensure that you have Java Runtime installed on your computer. To
install Java Runtime, please visit the Java website here:
http://www.java.com/en/download/manual.jsp
1. Start a web browser and enter the following URL:
http://apitest.enfora.com/enforaapp/
Give the modem a unique name
Configure the modem to talk with a specific server.
Configure the port number to be used by the modem.
Enable wakeup to be sent to the server every 60 seconds
28 novatelwireless.com