Changing A Bulb - Ford Transit Connect 2013 Owner's Manual

4. Unhook the wiper blade from the wiper
arm.
5. Slide the wiper blade to the side.
6. Remove the wiper blade.
Install new wiper blades in the reverse
order.
Note: Make sure that the wiper blade locks
into place.

CHANGING A BULB

WARNINGS
Switch the lamps and the ignition off.
Failure to do so could result in
serious personal injury.
Transit Connect () Long Wheelbase Double Cab in Van/Long Wheelbase Van/Short Wheelbase Double Cab in Van/Short Wheelbase Van, Short Wheelbase Kombi/Kombi BaseLong Wheelbase Ko
Maintenance
Bulbs can become hot, let the bulb
cool down before removing it. Failure
to do so could result in personal
injury.
The following instructions describe how to
remove the bulbs. Fit replacements in the
reverse order unless otherwise stated.
You must fit bulbs of the correct
specification. See Bulb Specification
Chart (page 174).
Note: We recommended that you see an
authorized dealer to change the headlamp
bulbs if your vehicle is fitted with air
conditioning. Some bulbs are difficult to
access.
Headlamp
Remove the covers to gain access to the
bulbs.
A
B
C
170
WARNINGS
Headlamp low beam and side
lamp
Headlamp high beam
Direction indicator