Ford Transit Connect 2013 Owner's Manual page 225

Phonebook Downloading
If your phonebook was not downloaded
during initial Bluetooth pairing follow this
process:
1. Press the PHONE button and then
keep pressing the MENU button to
scroll to the LOAD PHONEBK display.
2. Press the OK button.
Deleting a Paired Device or Phone
To remove a paired device follow this
process:
1. Press the PHONE button and then
keep pressing the MENU button to
scroll to the DEL DEVICE display.
2. Press the OK button. The first paired
device name will be shown. Scroll to
the required device name using the up
and down arrow buttons. Select delete
all to erase all paired devices.
3. Press the OK button multiple times to
unpair the device from the audio unit.
Privacy Mode
You can transfer a call from hands free to
private mode during an active call.
Press the MENU button until PRIVACY
appears, then press the OK button to
transfer. To return to hands free mode,
press the dial button.
Phone Menu Options
Press the PHONE button to select phone
mode. Press the PHONE button again to
display information such as phone name,
signal strength and battery level.
When in phone mode, press the MENU
button to scroll through the various phone
options:
• Redial.
• Phonebook.
• Call History.
Transit Connect () Long Wheelbase Double Cab in Van/Long Wheelbase Van/Short Wheelbase Double Cab in Van/Short Wheelbase Van, Short Wheelbase Kombi/Kombi BaseLong Wheelb
Audio System
• Add Device.
• Select Device.
• Set Primary.
• Delete Device.
• Bluetooth on and off.
• Load Phonebook.
Press the OK button to select the required
option, and use the up and down arrows
to change features.
Making and Receiving Calls
Outgoing calls can be made by:
• entering a number using the keys on
the radio
• selecting a contact from the
downloaded phonebook
• selecting a number or contact from the
call history log
• using quick dial by pressing one of the
radio preset buttons
• using the redial function
• using the cell phone.
Incoming calls can be answered by:
• pressing the call pickup button on the
audio unit
• using the cell phone.
Calls can be rejected using the end call
button on the audio unit, or by using the
cell phone directly.
USB
Note: Only use USB Mass-Storage device
compliant devices.
Note: Always switch your audio unit to a
different source (for example the radio)
before unplugging the USB device.
Note: Do not install or connect USB hubs
or splitters.
223