Ford Transit Connect 2013 Owner's Manual page 241

Before giving a voice command, wait for
the system announcement to finish
followed by a single beep. Any command
spoken before this does not register with
the system.
Speak naturally, without long pauses
between words.
Say
"Bluetooth Audio"
"Cancel"
"Line in"
"Phone"
"SYNC"
"USB"
"Voice settings"
"Help"
System Interaction and Feedback
The system provides feedback through
audible tones, prompts, questions and
spoken confirmations depending on the
situation and your chosen level of
interaction. You can customize the voice
recognition system to provide more or less
instruction and feedback.
When you say
"Interaction mode advanced"
"Interaction mode standard"
The system defaults to the standard interaction mode.
Transit Connect () Long Wheelbase Double Cab in Van/Long Wheelbase Van/Short Wheelbase Double Cab in Van/Short Wheelbase Van, Short Wheelbase Kombi/Kombi BaseLong Wheelb
SYNC
You can interrupt the system at any time
while it is speaking by pressing the voice
button. You can also cancel a voice session
at any time by pressing and holding the
voice button.
Initiating a Voice Session
Stream audio from your cell phone.
Cancel the requested action.
Access the device connected to the auxiliary input jack.
Make calls.
Return to the main menu.
Access the device connected to your USB port.
Adjust the level of voice interaction and feedback.
Hear a list of voice commands available in the current
mode.
The default setting is to a higher level of
interaction in order to help you learn to use
the system. You can change these settings
at any time.
Adjusting the Interaction Level
Provides less audible interaction and more
tone prompts.
Provides more detailed interaction and
guidance.
239
Press the voice button. A list of
available commands appears in
the display.
If you want to
Press the voice button. Say
"Voice settings" when prompted,
then any of the following:
The system