E146878
2. Remove the screws.
3
E102590
3. Disconnect the electrical connector.
4. Remove the headlamp.
Note: When fitting the headlamp, make
sure that you reconnect the electrical
connector correctly.
Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the retaining clips.
Fiesta (CC3) Indonesia/Philippines/Taiwan/Thailand/Vietnam, Vehicles Built From: 07-03-2016, CG3692en enPHI, Edition date: 201511, Second Printing
Maintenance
CHANGING A BULB
Switch the lamps and the ignition off.
2
Failure to follow this warning could
result in serious personal injury.
Make sure the bulbs have cooled
down before removing them. Failure
to follow this warning could result in
serious personal injury.
Note: Only fit bulbs of the correct
specification.
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp
4
E146870
A
B
C
Note: Remove the covers to gain access to
the bulbs.
Headlamp Low Beam
1.
Remove the headlamp. See
Removing a Headlamp (page 131).
132
WARNINGS
B
A
Headlamp low beam.
Headlamp high beam and side
lamp
Front direction indicator.
C