Ford Transit Connect 2013 Owner's Manual page 237

Note: If you select store position, this will
also save the destination in your favorites.
Selecting a Favorite
1. Press the NAV button.
2. Select the favorites option.
3. Scroll to the required destination using
the arrow buttons.
4. Press the OK button to start
navigation.
Adjusting the Navigation Voice Level
You can adjust the voice prompt level
during an active voice prompt by using the
volume control.
Note: During active route guidance pressing
the information button will repeat the last
navigation instruction.
Nav Audio Mixing
This feature allows you to adjust the
volume mix between the audio unit and
navigation voice level. See General
Information (page 63).
Tolerant Destination Input
This function will search a number of
destinations with a similar spelling to what
you have entered. This is helpful if you are
unsure on how to spell a destination.
1. Press the NAV button.
2. Scroll to the destination input option.
3. Before entering your destination details
select Tolerant and then begin to
input your destination.
4. Press the OK button. The system will
search for destinations with similar
spellings.
5. Use the arrow buttons to select a
destination from the list and press the
OK button to confirm your destination.
Transit Connect () Long Wheelbase Double Cab in Van/Long Wheelbase Van/Short Wheelbase Double Cab in Van/Short Wheelbase Van, Short Wheelbase Kombi/Kombi BaseLong Wheelb
Navigation
Route Displays
Map Display
Press the MAP button to view map mode.
This view will show your current location
with your vehicle in the center shown as
an arrow surrounded by a circle. The arrow
will face in the direction of travel.
The information on the top line gives the
name of the current road, or the next road
to take if a turn is approaching.
You can change the way the map is
displayed by altering the zoom and
orientation settings. Press function button
one. The current map scale is shown on
the display.
Map scale settings may be set between
0.05 miles to 500 miles or 50 meters to
500 kilometers, with an auto setting on
the top. The auto setting continuously
changes the map scale according to
vehicle speed and the road type being
driven.
You can use the arrow buttons to change
the view to 2D, turn-by-turn, 3D or a clean
view.
Zoom
This feature will automatically increase
the zoom on the map display at times
when you are required to make a turn, or
perform more complex maneuvers. Shortly
after the zoom scale will return to the
previous level when in auto mode.
Manual: Press function button one and
adjust the setting using the left or right
arrow buttons. Press OK to confirm your
setting.
Auto: Press function button one and using
the up or down arrow key select the auto
option. Press OK to confirm your setting.
235