X-IO ISE-2 Series User Manual page 73

Initialize and Configure
The ISE creates the mapping and displays a confirmation similar to that shown in the figure (46) below.
Presenting 'Volume03' to 'Prod01': OK
Presenting 'Volume03' to 'Prod02': OK
Figure 46. Volume Host Mapping
After the initial volume-host mapping scheme has been created, it can be modified or deleted at any time using
the CLI commands detailed in "Modify Volume–Host Mappings" on page 82.
Xiotech—Proprietary 160337-000 Rev D, 30 September, 2013
ISE User Guide
Page 65