Table of Contents
Advertisement
ISE User Guide
The ISE 7-Series is initialized with one pool distributed across two DataPacs. To initialize the ISE and the
storage pools after skipping the initialization prompt, use the initialize command with no parameters.
View the sparing percentage in effect on a system that has already been initialized by using either of the
following commands:
•
Type initialize. The console displays the following message:
Already initialized. Nothing to do. (Sparing = 20%).
•
Type show datapac. The resulting console output includes the spare level in effect.
Page 46
160337-000 Rev D, 30 September, 2013
Initialize and Configure
Xiotech—Proprietary
Advertisement
Table of Contents
