X-IO ISE-2 Series User Manual page 140

ISE User Guide
If the firmware upgrade is not compatible, the File not compatible...Upgrade failed status message appears.
g. Click and the upgrade process terminates.
OK
The incompatible upgrade is discarded, the file path in the
browser view reverts to the
h. Locate a compatible firmware upgrade and return to the beginning of
When the firmware upgrade is compatible, the File accepted...Upload succeeded status message appears.
Figure 96. Upgrade File Accepted
i. Click to proceed (Figure 94) and the upload process begins.
OK
This upload can require several minutes to complete. Upon completion, the
view refreshes with the name of the uploaded file in the
bers only).
Figure 97. Upload / Upgrade Firmware—Upgrade Ready
Step 2. Install Firmware Upgrade
During the firmware upgrade process, the
show Warning [MRC FW Update In Progress] for each MRC and the
view is shown as Warning.
Summary
If the upgrade file was uploaded manually, ensure that the browser is accessing the MRC that received the
uploaded firmware file. Refresh the
field.
Current File:
a. Click in the
SUBMIT
b. Click in the ...upgrade now? confirmation pop-up.
OK
The
Upload / Upgrade Firmware
MRC upgrade preparation takes place, as shown in the figure below (Figure 98). The view presents an ani-
mated logo and refreshes approximately every 10 seconds, indicating the percentage of completion. This
Page 132
Upload / Upgrade Firmware
MRC Status
Upload / Upgrade Firmware
section of the
Step 2: Upload / Upgrade Firmware
progress view appears. The process may take up to ten minutes while
160337-000 Rev D, 30 September, 2013
selection box is cleared, and the
Upload File
view.
Step 1
field as shown below (sample num-
Current File:
and on the
Detailed Status
for the MRC on the
Status
browser view, and
view (Figure 92 on page 130).
Maintenance
.
Upload / Upgrade Firmware
page both
MRC Information
At-A-Glance
appears in the
upgrade.ue
Xiotech—Proprietary