Table of Contents
Advertisement
Appendix A: Quick Start
5. Click
under the
SUBMIT
6. Click
on the confirmation message that appears.
OK
The ISE checks the uploaded file to ensure its compatiblity with the hardware and software currently in the
system. If the file is compatible, the system displays a Success message; skip to Step 7.
If the uploaded file is not compatible, the system displays a message indicating a compatibility mismatch
and showing the current configuration of hardware and software versions on the ISE.
•
Click
in this message. The Upload / Upgrade Firmware view remains.
OK
•
Locate an MRC firmware file that is compatible with the hardware and software versions on the ISE
and begin the procedure again from Step 3 above.
7. Click
on the Success message that appears after a successful compatibility check.
OK
The view reverts to the
opposite the
Current File:
8. Click
under the
SUBMIT
The upgrade begins, presenting an
approximately every 10 seconds. This view indicates the upgrade Progress (%): along with a spinning logo.
The progress bar may reset to zero as various segments of memory are being upgraded. When the refresh
times out, the browser's The page cannot be displayed view appears.
Figure 105. ISE Firmware Upgrade Progress
9. Allow thirty seconds for the ISE to reboot, then reconnect by refreshing the browser. The ISE creates a
backup copy of the new firmware, overwriting the pre-upgrade firmware:
•
The logo on the
monitors the progress as the pre-upgrade firmware is overwritten. This process can require several
minutes. The progress bar may reset to zero as various segments of memory overwrites complete.
•
When the upgrade process is complete, the
the new firmware version is installed in the
Xiotech—Proprietary
text box.
Upload File:
Upload / Upgrade Firmware
label.
to begin the MRC upgrade and click
Step 2:
Upload / Upgrade Firmware
Upload / Upgrade Firmware
160337-000 Rev D, 30 September, 2013
screen (Figure 104), displaying the accepted file name
OK
progress page, shown below, refreshing
progress view starts spinning again, and the system
Upload / Upgrade Firmware
and
firmware version fields.
MRC 1
MRC 2
ISE User Guide
on the confirmation message.
view appears, indicating that
Page 153
Advertisement
Table of Contents
