X-IO ISE-2 Series User Manual page 122

ISE User Guide
Power Supply Detailed
Select >>
Environment Power Supply
environment. A partial page is shown below (Figure 83). This page is also accessible by clicking
next to the icon in the left navigation pane on most pages.
Figure 83. Power Supply Environment Details Partial Page
Click or press
F5
Refresh
The view includes information for each unit as described in the following table (Table 33).
Power Supply
Field
Status
Detailed Status
Serial Number, Part Number
Blower, Speed Status
Physical Location
Ambient Temperature
Table 33: Power Supply—Environment Display Explanation
Page 114
to view detailed information about the power supplies and their
to update the environment page with dynamic environmental changes.
Comment
Overall state of the power supply; normally Operational, other status: Warning and Criti-
cal.
Normal is None, otherwise detail for any abnormal state.
Component serial number and part number.
Each power supply contains two blowers, all of which operate independently under
system control. Speeds are grouped into ten RPM ranges, from 1 (slow) to 10 (fast).
Physical bay number; see Figure 101 on page 140 for the identification of the 1 and 2
bays.
Power supply temperature; see "Temperature Indicators" on page 108.
160337-000 Rev D, 30 September, 2013
Monitoring
Power Supply
Xiotech—Proprietary