X-IO ISE-2 Series User Manual page 64

ISE User Guide
The Orchestrator interface (see the Orchestrator User Guide) provides storage pool management through the
following select strings:
1. >>
All Devices ise_name
2. >>
All Devices ise_name
3. >>
All Devices ise_name
The Web-Mgt interface provides a Storage Pool Information view (see Figure 38 on page 57), accessed by
placing the cursor over the
characteristics listed below are shown for each storage pool.
Characteristic
Status
Detailed Status
Pool identifier
Type
Number Volumes Pool
Remaining Capacity
Overall Volume Status
Pool Stats
Table 16: Storage characteristics
Storage Pool Information panels display a list of all volumes in the pool as shown below. This view is also
reached by expanding the pool tree element in the navigation pane of many of the Management Information
panels.
Page 56
>> >>
Storage View Storage Pools
>> >>
Storage View Volumes
>> >>
Storage View Mirrors
tab and selecting
Storage
Description
Overall state of the storage pool. This field usually reports Operational. Other possible
states include Uninitialized or Non-Operational.
Reports any unusual state the pool may be in. This field usually reports None.
Equivalent to DataPac number.
Performance DataPac
Balanced DataPac
Capacity DataPac
Number of volumes assigned to the identified pool.
Remaining capacity by RAID type.
Reports the overall state of the volumes within the storage pool. If any volumes in the pool
are non-operational, this status reports Non-Operational. Click this link to select the Volume
Summary view (see Figure 41 on page 59).
Pool capacity (raw GB used vs. free)
Pool usage (total percentage of pool used, percentage used for each RAID type, and per-
centage free)
160337-000 Rev D, 30 September, 2013
from the drop-down menu. In this view, the
display
Initialize and Configure
Xiotech—Proprietary