Table of Contents
Advertisement
ISE User Guide
To restart the ISE from the Orchestrator, Web-Mgt, or CLI, follow the procedure detailed in "Restart" on
page 125. When an ISE is restarted, it performs a cold boot. Boot types are summarized in Table 10 on
page 39.
The ISE power states differ for a
following table (Table 11).
Action
Power State
Power on (power is on to all components)
Restart
Standby (power is off to all components except
system LED and Ethernet ports to intercept WOL
Shutdown
magic packet
Table 11:
Restart and Shutdown Power States
Page 40
(see "Shutdown" on page 39) and a
Shutdown
)
160337-000 Rev D, 30 September, 2013
Restart
Means of Activation
Automatically restarts
Use third-party utility to send appropriate WOL magic
packet (if enabled) or toggle power switches (ensure both
are off simultaneously for five seconds)
Power-up, Shutdown, Restart
as described in the
Xiotech—Proprietary
Advertisement
Table of Contents
