Table of Contents
Advertisement
ISE User Guide
5. Click
to add the selected HBA ports to the Selected HBA Ports list. The host consists of the ports in
Add
the Selected HBA Ports list after
6. Select the volumes to map to this host from the
7. Click
to add the selected volumes to the
Add
TRL or
HIFT keys while clicking
C
S
If no volumes have been created, no entries appear in the
to hosts during the volume-creation process (see "Mapping Volumes and Hosts" on page 64).
8. Enter comment text as needed in the optional Comment field. The comment may be up to sixty alphanu-
meric characters long. Special characters are accepted except those listed in "Reserved Characters" on
page 29.
9. To clear volume data entered since the last
saved settings.
10. To create the host as defined, click
existing volumes with their host mappings.
11. To create additional hosts, repeat Step 1 through Step 10 in this procedure until all desired hosts have
been created.
Figure 44. Host Summary
Page 62
is clicked.
SUBMIT
Available Volumes
Selected Volumes
.
Add
, click
SUBMIT
and the
SUBMIT
Host Summary
160337-000 Rev D, 30 September, 2013
list.
list. To select multiple volumes, use the
list. Volumes can be mapped
Available Volumes
and the view restores the most recently
RESET
appears (see Figure 44), showing all
Initialize and Configure
Xiotech—Proprietary
Advertisement
Table of Contents
