X-IO ISE-2 Series User Manual page 151

Maintenance
Option
Network Ports 1 and 2
Network Ports 1 and 2
Port Speed
Table 47: System Settings After Reformat Operation
Reformatting an ISE performs the following actions:
• Permanently removes all volume and host configuration data and all storage pool metadata
• Restores factory defaults for all system configuration parameters
• Shuts down both MRCs
• Restarts both MRCs
User data on the DataPacs is not erased, but all metadata that allows mapping to user data is removed,
resulting in inaccessibility to the data through the ISE. All Web-Mgt and CLI connections are terminated. When
the restart is complete, the ISE again accepts Web browser and remote console connections.
Xiotech—Proprietary
Setting
Event Subscriptions
Current user settings are retained
SNMP Trap Destinations
Current user settings are retained
Global System Settings
Auto
160337-000 Rev D, 30 September, 2013
ISE User Guide
Page 143