Reduced Air Flow; Mechanical Loading; Circuit Overloading; Reliable Earthing - X-IO ISE-2 Series User Manual

ISE User GuideUser Guide

Reduced Air Flow

Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of
the equipment is not compromised.

Mechanical Loading

Mounting of the equipment in a rack should be such that the rack and supporting floor structure weight
capacities are not compromised.

Circuit Overloading

Consideration should be given to the connection of the equipment to the supply circuit and the effect that
overloading of circuits might have on over-current protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing the concern.

Reliable Earthing

Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to
supply connections other than direct connections to the branch circuit (for example, use of power strips).

Power Supplies

All ISE Storage Blade models have redundant power supplies. Both AC power cords must be removed before
servicing any ISE Storage Blade. All ISE Storage Blade models must be serviced only by an Authorized
Service Technician.

Safety and Emissions

All ISE Storage Blade models have been verified to the following safety certifications:
• UL60950-1
• EC Directive 2006/95/EC
• IEC 60950-1
All ISE Storage Blade models have been verified to the following emissions/immunity certifications:
• FCC CFR 47 - Part 15
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• CSA C108.8-M1983
• EC Directive 89/336/EEC
• EN61000-3-3
• EN61000-4-3
• EN61000-4-5
• EN61000-4-8
• EN 50081-1
Page 6
• CSA C22.2 No. 60950-1
• EN 60950-1
• CISPR 22
• EN61000-3-2
• EN61000-4-2
• EN61000-4-4
• EN61000-4-6
• EN61000-4-11
• EN 55022
160337-000 Rev D, 30 September, 2013
Introduction
Xiotech—Proprietary