Activation Screen Page - APRILIA DORSODURO 1200 ABS - ATC Service Station Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Braking system

ACTIVATION screen page

This screen page is used to delete errors in the
control unit memory and to activate some systems
controlled by the control unit.
Characteristic
Front brake bleeding procedure
Rear brake bleeding procedure
ABS warning light
Ambient parameter error reading (1)
Ambient parameter error reading (2)
Ambient parameter error reading (3)
Ambient parameter error reading (4)
Ambient parameter error reading (5)
Error clearing (1)
Error clearing (2)
BRAK SYS - 354
email: info@motomatrix.co.uk
DORSODURO 1200 ABS - ATC
ACTIVATION
Value/example Unit of
measure
ment
Notes
Useful in case of lever sponginess although the
bleeding has been done as in a regular braking
system
Useful in case of lever sponginess although the
bleeding has been done as in a regular braking
system
For Shiver, Shiver GT and Dorsoduro models, the
ABS warning light is caused to flash. For the Mana
model, both the EFI warning light and the ABS
word flash on the display.
The ambient parameters are 4: Number of error
detections, Operation cycles from the last detec-
tion, Battery voltage, Speed.
Number of error detections: number of times the
error has been detected by the control unit;
for example, if it indicates 2, it means that the error
has been detected (ATT), then it has not been de-
tected for a while (sent to the MEM) and then it
has been detected again.
Operation cycles from the last reading: a cycle is
counted if the following occurs: key ON and speed
over 20 km/h.
If for example 5 is shown, it means that the last
time the error has been measured was 5 cycles
ago.
Press "enter" to transfer errors from the memory
(MEM) to the historical record (STO).
In the next connection between Navigator and the
control unit, the historical errors (STO) are no lon-
ger shown.