Installing The Clutch Cover; Clutch-Side Cover Oil Seal Installation - APRILIA DORSODURO 1200 ABS - ATC Service Station Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Engine
•
Fit the clutch springs.
•
Fit the screw washers.
•
Tighten the six screws operating in
stages and diagonally.
•
On reassembly, replace the gasket under clutch cover.

Installing the clutch cover

CLUTCH-SIDE COVER OIL SEAL INSTALLATION

•
For controlled driving of the oil seal, take a 0.5 mm (0.020 in) thick washer, having an inside
diameter of 12 mm (0.47 in) and outside diameter of 20 mm (0.79 in).
•
Prepare the following tools:
Specific tooling
020376Y Adapter handle
020362Y 12 mm guide
020891Y Adapter 25 mm (0.98 in)
•
Assemble the tool using the washer for
controlled driving then, paying atten-
tion to the assembly direction, set the
oil seal in its seat, with marking facing
the operator.
•
Place the oil seal retainer with its flat
side resting against the oil seal.
ENG - 238
email: info@motomatrix.co.uk
DORSODURO 1200 ABS - ATC