APRILIA DORSODURO 1200 ABS - ATC Service Station Manual page 228

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Engine
pos. Description
1 Screw fastening Clutch Cover / inter-
mediate Clutch side cover
2 Clutch fastener nut
3 Fastening oil filler plug on Clutch cov-
er
4 Screw fastening fixing Plate / Clutch
control Mounting
5 Screw fastening clutch control
mounting on flywheel side crankcase
half
•
Unscrew and remove the six perimeter
fastener screws.
•
Remove the clutch cover.
•
Remove the gasket
Removing the clutch cover alone is only recom-
mended when replacing the clutch plates. When
removing the entire clutch assembly, removing the
clutch side cover is recommended.
However, removing the entire clutch assembly is
possible by removing the clutch cover alone. In this
case, proceed as follows:
•
measure the projection of the clutch
housing from the crankcase before dis-
assembling;
•
when refitting, check that the projection
has not changed before tightening the
clutch nut. If the projection has
changed, rotate the crankshaft to cor-
rectly engage the engine oil pump drive
gear on the clutch housing with the oil
pump driven gear.
ENG - 228
email: info@motomatrix.co.uk
DORSODURO 1200 ABS - ATC
C
LUTCH COVER
Type Quantity
M6 6 13 Nm (9.59 lbf ft)
M24x1 1 170 Nm (125.38 lbf ft)
- 1 2 Nm (1.48 lbf ft)
M5 3 5.50 Nm (4.06 lbf ft)
M6 2 13 Nm (9.59 lbf ft)
Torque Notes
-
Chamfer
-
Loctite 242
-