APRILIA DORSODURO 1200 ABS - ATC Service Station Manual page 365

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
DORSODURO 1200 ABS - ATC
•
Repeat this procedure on the remain-
ing bleed valves of the system and
close them all to the prescribed tight-
ening torque.
•
Remove the bleeding unit.
•
Always fill the reservoir up to the reference "MAX" and refit the cap.
•
Check the stroke and the sensitivity of both the lever and the brake pedal.
•
If, after bleeding, the pedal or the lever stroke is too long, check that there are no leaks in
the braking system and if everything is ok, continue bleeding operations using Navigator as
described.
•
Detach the bleed hoses and close the bleed screws again to the correct tightening torque.
Front brake pump
pos.
1 Pipe union fastening brake pipe to
2 Fastener for front brake pump on
3 TBEI screw fastening the brake tank
4
5 Screw fastening the brake pipe to
steering base
email: info@motomatrix.co.uk
F
RONT BRAKE PUMP
Description
pump
handlebar
to the plate
TBEI screw
Type Quantity
M10x1 1 25 Nm (18.44 lbf ft)
- 2 10 Nm (7.37 lbf ft)
M6x20 1 10 Nm (7.37 lbf ft)
M6x16 1 12 Nm (8.85 lbf ft)
M6x25 1 10 Nm (7.37 lbf ft)
Braking system
Torque Notes
-
-
-
-
-
BRAK SYS - 365