Table of Contents
Advertisement
6
Using the product
6.1.
Performing settings
6.1.1.
Configuring measurements
The measurement parameters/units and the number and order of
displayed measurement parameters in the reading display type can
be set in the List.
Only those parameters and units that are enabled in the reading
display appear in the measured value display, in the saved
measurement records and on the record printouts.
The settings only apply to the measurement type currently
activated.
Overview of measurement parameters (available selection depends
on the chosen measurement type, set fuel, and the sensors
available in the measuring instrument):
Display
FT
AT
Itemp
Pump
O
2
CO
2
qAnet
Effn
qAgr.
Effg
Draught
∆P
CO
uCO
NO
Measurement parameter
Flue gas temperature
Combustion air temperature
Instrument temperature
Pumping capacity
Oxygen
Carbon dioxide
Flue gas loss without due consideration of the
calorific value range
Efficiency without consideration of the heat value
range
Flue gas loss with due consideration of the
calorific value range
Efficiency with due consideration of the calorific
value range
Flue draught
Differential pressure
Carbon monoxide
Carbon monoxide undiluted
Nitrogen monoxide
6 Using the product
15
Advertisement
Table of Contents
