5
First steps
5.1.
Commissioning
Please note the information in the document Commissioning and
Safety (printed version supplied with the product).
5.2.
Getting to know the product
5.2.1.
Connecting probes
Connecting flue gas probes/gas pressure
adapters/temperature adapters
> Insert the connector plug into the flue gas socket and lock by
slightly turning it clockwise (bayonet lock).
Connecting other probes
> Insert the connector plug of the probe into the probe socket.
5.2.2.
Mains unit/rechargeable battery
If the mains unit is connected, the measuring instrument is
automatically powered from the unit.
5.2.2.1.
Charging the rechargeable battery
The rechargeable battery can only be charged at an ambient
temperature of 0 to 35 °C. If the rechargeable battery pack has
discharged completely, the charging time at room temperature is
approx. 5-6 hrs.
1. Connect the instrument plug of the mains unit to the mains unit
socket on the measuring instrument.
Always connect the probes to the flue gas socket or probe
socket before switching on the measuring instrument;
switch the measuring instrument off and restart after
replacing a probe.
There must be no more than one extension lead (0554
1201) between measuring instrument and flue gas probe.
5 First steps
11