Table of Contents
Advertisement
6 Using the product
Display
NO
x
λ
AmbCO
O
ref
2
Dew Pt
Performing actions
> To add a measurement parameter to the display list: Touch
Add
> To delete a measurement parameter from the display list:
Touch
> Change the unit of a measurement parameter: Touch the
measurement parameter name to open the selection list of
measurement units.
> To change the position of a measurement parameter in the
display list:
> To accept changes: Touch Confirm.
6.1.2.
Graphics
In the graphics reading display type, the reading progress can be
displayed as a line diagram.
A maximum of 4 measurement parameters can be set at any one
time. Only those measurement parameters/units can be displayed
that are available in the reading display type List.
> Touch
parameters/units.
The first four measurement parameters from the
type are used as the default setting for the graphics too.
6.1.3.
| Instrument settings | Language
The user interface language can be set.
The number of available languages depends on the activated
country version.
16
Measurement parameter
Nitrogen oxide
Fuel-air ratio
Ambient carbon monoxide
Oxygen reference
Flue gas dewpoint temperature
to open the selection list of measurement parameters.
.
press down and drag.
to open the selection list of measurement
List
reading display
Advertisement
Table of Contents
