Table of Contents
Advertisement
Service instruction
7 .
Assembling the
iSave
Disassembling and assembling iSave 21
1.
Fit the steel coupling onto the shaft of the
pressure exchanger.
3.
Orient both the steel coupling and the
2 guide holes on the vane pump to fit into
the pressure exchanger.
180R9219 / 521B1171 / DKCFN.PI.003.K3.02 / 11.2013
2.
Fit the polymer coupling on the steel
coupling.
4.
Mount the bolts into the flange and tighten
them with 30 Nm ±3 Nm.
17
Advertisement
Table of Contents
Need help?
Do you have a question about the iSave 21 and is the answer not in the manual?
Questions and answers