Font Cover Assy; Upper Cover Assy, Rear Cover Assy - Brother HL 2060 - B/W Laser Printer Service Manual

1.5

Font Cover ASSY

(1) Remove the font cover ASSY by loosening the screw on the top and releasing the
hooks on the bottom.
1.6

Upper Cover ASSY, Rear Cover ASSY

1.6.1 Upper cover ASSY, Rear cover ASSY
(1) Loosen the top left screw and 2 screws at the top of the Rear cover ASSY.
(2) Release the hook at the right side of the Upper cover ASSY and lift it upwards to
remove.
Note: Pay attention to the Paper sensor actuator when removeing the Upper cover
ASSY.
The hook is released automatically by removing the
direction of the arrow.
Screw
Screw
Hook
Figure 4.5
Upper cover ASSY
Swing tray
Figure 4.6
IV-5
Hook
Font cover ASSY
Upper cover ASSY in the
Hook