Reset Switch (Active-Low); Done Led; Init Led; User Programmable Pins - Xilinx Virtex-II Pro User Manual

User Programmable Pins

15. Reset Switch (Active-Low)

The reset switch connects to the INIT pin on the DUT, allowing the user, after
configuration, to reset the logic within the DUT. Before and during configuration of the
DUT, the INIT pin has no function. After configuration, the INIT pin becomes a regular
I/O. When pressed, this switch grounds the INIT pin.
Table 1-8
Table 1-8: User Hardware and Corresponding I/Os

16. DONE LED

The DONE LED indicates the status of the DONE pin on the DUT. This LED lights when
DONE is high or if power is applied to the board without a part in the socket.

17. INIT LED

The INIT LED lights during initialization.
User Programmable Pins

18. Rocket I/O Transceiver Pins

Table 1-9
(MGT) for the available DUT package types.
Table 1-9: MGT TX and RX Pin Pairs
Virtex-II Pro Prototype Platform User Guide
UG027 / PN 0402044 (v1.6) October 25, 2002
shows the INIT pin locations for the available DUT package types.
Label FG456
RESET (INIT) W17
Note: Refer to the readme.txt file for implementation of this user pin.
shows the TX/RX pin pair locations of the Rocket I/O multi-gigabit transceiver
Pin Pair
1
2
TX
3
4
1
2
RX
3
4
www.xilinx.com
1-800-255-7778
Pin Number For Package Type
FF672
AD6
FG456 (P, N)
A8, A7 A10, A9
AB14, AB13 AF16, AF15
A14, A13 A16, A15
AB8, AB7 AF10, AF9
A9, A10 A11, A12
AB15, AB16 AF17, AF18
A15, A16 A17, A18
AB9, AB10 AF11, AF12
FF1152
AL6
FF672 (P, N) FF1152 (P, N)
A16, A17
AP20, AP21
A20, A31
AP16, AP17
A15, A14
AP19, AP18
A19, A18
AP15, AP14
R
21