Fujitsu Siemens Computers PRIMERGY TX200 S4 Service Supplement Manual page 13

V
CAUTION!
● Proper operation of the device (in accordance with IEC 60950-1/
EN 60950-1) is only ensured if the casing is completely assembled
and the rear covers for the installation openings have been put in
place (electric shock, cooling, fire protection, interference
suppression).
Install only system expansions that satisfy the requirements and rules
●
governing safety and electromagnetic compatibility and relating to
telecommunications terminal equipment. If you install other expan-
sions, you may damage the system or violate the safety regulations
and regulations governing RFI suppression.
● The components or parts marked with a warning label (e.g. lightning
symbol) may only be opened, removed or exchanged by authorized,
qualified personnel. The hot-plug power supply units are exceptions
to this rule.
● The warranty expires if the device is damaged during the installation
or replacement of system expansions.
You may only set those resolutions and refresh rates specified in the
●
„Technical data" section of the monitor description. Otherwise, you
may damage the monitor.
Batteries
V
CAUTION!
Incorrect replacement of batteries may lead to a risk of explosion. The
●
batteries may only be replaced with identical batteries or with a type
recommended by the manufacturer (see the Technical Manual for the
system board).
Do not throw batteries into the trash can. They must be disposed of
●
in accordance with local regulations concerning special waste.
● The battery must be disposed of in accordance with local regulations
concerning special waste.
TX200 S4
Service Supplement
Safety notes
13