Fujitsu Siemens Computers PRIMERGY TX200 S4 Service Supplement Manual page 28

Replacing the Power backplane
Figure 11: Removing the Power backplane
Ê Remove the screw (see the circle).
Ê Push the Power backplane in direction of the arrows until it gets out of the
PS cage guides. Take out the Power backplane.
Ê Insert the new Power backplane and push the Power backplane in direction
of the front side until it engages in the PS cage guides.
Ê Fasten the Power backplane with one screw in the PS cage.
Ê Push the PS cage into the bay. Make sure that the noses of the PS cage
engage in the housing (for a detailed description see the Options Guide).
Ê Fasten the PS cage with three screws at the rear side of the server.
28
Guides
Service Supplement
Replacement routines
TX200 S4