Table of Contents
Advertisement
2.1 Memory
Module（SO-DIMM）Installation
The IV32 Motherboard provides one 204-pin SO-DIMM slot, and it supports up to
8GB DDR3 1333/1600MHz. When installing the Memory device, please follow the
steps below：
Step 1. Firmly insert the SO-DIMM at an angle into its slot. Align the SO-DIMM on
the slot such that the notch on the SO-DIMM matches the break on the slot.
Step 2. Press downwards on SO-DIMM until the retaining clips at both ends fully
snap back in place and the SO-DIMM is properly seated.
y
Caution
The SO-DIMM only fits in one correct orientation. It will cause
permanent damage to the development board and the SO-DIMM if
the SO-DIMM is forced into the slot at the incorrect orientation.
IV32 Motherboard User Manual
Chapter 2 Installations
!
7
Advertisement
Table of Contents
