1. Manuals
  2. Brands
  3. Winmate Manuals
  4. Motherboard
  5. IQ30-100
  6. User manual

Winmate IQ30-100 User Manual

3.5” embedded sbc, qualcomm snapdragon 660 octa-core, 2.2 ghz cpu
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
3.5" Embedded SBC IQ30
V100
Qualcomm Snapdragon™ 660 octa-core, 2.2 GHz CPU
User Manual
Document Version 1.0
Document Part No. 915211101079
Please read these instructions carefully before using this product, and save this manual for future use.

Advertisement

Table of Contents
loading

Related Manuals for Winmate IQ30-100

Summary of Contents for Winmate IQ30-100

  • Page 1 3.5” Embedded SBC IQ30 V100 Qualcomm Snapdragon™ 660 octa-core, 2.2 GHz CPU User Manual Document Version 1.0 Document Part No. 915211101079 Please read these instructions carefully before using this product, and save this manual for future use.

  • Page 2: Table Of Contents

    2.2 C ..............................14 ONNECTOR ESCRIPTION 2.3 C OS ........................ 38 ONFIGURING ERIAL ETTINGS IN NDROID CHAPTER 3: WINMATE HOME MANAGER .......................... 40 3.1 H ..............................41 OW TO PPLICATIONS 3.2 H ............................. 43 OW TO NLOCK PPLICATIONS 3.3 H ..............................

  • Page 3: Preface

    0BChapter 1: Introduction Preface Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners.
  • Page 4 IQ30 3.5" Embedded SBC User Manual Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. Note: A note is used to emphasize helpful information Important:...

  • Page 5: About This User Manual

    0BChapter 1: Introduction 11. If any of the following situations arises, get the equipment checked by service personnel: A. The power cord or plug is damaged. B. Liquid has penetrated into the equipment. C. The equipment has been exposed to moisture. D.

  • Page 6: Chapter 1: Introduction

    IQ30 3.5" Embedded SBC User Manual Chapter 1: Introduction This chapter provides the IQ30 Motherboard product overview, describes its features and hardware specifications.

  • Page 7: Introduction

    0BChapter 1: Introduction 1.1 Introduction Thank you for choosing Winmate 3.5” Embedded SBC IQ30. The IQ30 is the 3.5” Embedded SBC IQ30 based on the Qualcomm® Snapdragon™ 6 series mobile platform. Featuring compact 146 x 102 mm dimensions, the IQ30 design offers impressive I/O functionality, including 1 x COM, 2 x USB 2.0, 1 x USB Type C, 1 x LAN ,1 x SD slot.

  • Page 8: Sbc Specifications

    IQ30 3.5" Embedded SBC User Manual 1.4 SBC Specifications Model Name IQ30-100 Qualcomm Snapdragon™ 660 octa-core, 2.2 GHz Memory 3 GB LPDDR4 (Optional 4 GB base on MOQ 1K) System Specification Storage 32 GB MLC Operating System Android 9.0 Display...

  • Page 9: Functional Description

    0BChapter 1: Introduction 1.5 Functional Description IQ30-100 3.5” Embedded SBC Function Block...

  • Page 10: Physical Description

    IQ30 3.5" Embedded SBC User Manual 1.6 Physical Description IQ30 3.5” Embedded SBC Motherboard Dimensions PCB Top Layer (Top View) PCB Bottom Layer (Top View) I/O Side (Front View)

  • Page 11: Chapter 2: Hardware Installation

    1BChapter 2: Hardware Installation Chapter 2: Hardware Installation This chapter provides information on how to use jumpers and connectors on the IQ30 Motherboard.

  • Page 12: Sbc Components

    IQ30 3.5" Embedded SBC User Manual 2.1 SBC Components This section describes the location of each of the board’s jumpers and connectors. 2.1.1 CB Connector Location Connectors, Jumpers and switches PCB Top Layer (Top View)
  • Page 13 1BChapter 2: Hardware Installation PCB Bottom Layer (Top View) 2.1.2 Antenna Connector Location PCB Top Layer (Top View)

  • Page 14: Connector Description

    IQ30 3.5" Embedded SBC User Manual 2.2 Connector Description Label Function Note Terminal Block 2EHDRM-03P CN11 Light Bar #1 4p P:1.0mm SMD 180° white CN10 Light Bar #2 4p P:1.0mm SMD 180° white CN30 & CN37 CN30: 2p P:1.25mm/SMD Backlight COOLAY CN37: 90°...
  • Page 15 1BChapter 2: Hardware Installation Label Function Note RTC Battery #1 ML414H-IV01E 3.3V/1mAh RTC Battery #2 Hirose:DF13-2P-1.25V 180° brown LAN1 LAN (With POE Option) RJ45 with LED/PoE+ AMIC 2p P:2.0mm DIP 180° DMIC #1 4p P:1.0mm SMD 180° white DMIC #2 4p P:1.0mm SMD 180°...
  • Page 16 IQ30 3.5" Embedded SBC User Manual Signal Name Description +V5S Light Bar Power 5V LIGHT_RLED1- Light Bar #1 Red LED LIGHT_GLED1- Light Bar #1 Green LED LIGHT_BLED1- Light Bar #1 Blue LED Light Bar GND Light Bar GND 2.2.3 CN10: Light Bar #2 Signal Name Description +V5S...
  • Page 17 1BChapter 2: Hardware Installation Signal Name Description V_LED- Back Light V- V_LED+ Back Light V+ Back Light GND Back Light GND 2.2.5 CN1: Backlight Signal Name Description BKLPWR Back Light Power 12V (or 5V) BKLPWR Back Light Power 12V (or 5V) BKLPWR Back Light Power 12V (or 5V) Back Light GND...
  • Page 18 IQ30 3.5" Embedded SBC User Manual Signal Name Signal Name Description Description LVDS Power TXE0-_R TX Even 0 V- LCDVDD 3.3V (or 5V/12V) LVDS Power TXE0+_R TX Even 0 V+ LCDVDD 3.3V (or 5V/12V) LVDS Power TXE1-_R TX Even 1 V- LCDVDD 3.3V (or 5V/12V) LVDS GND...
  • Page 19 1BChapter 2: Hardware Installation Pin Signal Name Signal Name Description Description EDPAUXN EDP AUX - EDP_SDA_CONN EDP SDA EDPAUXP EDP AUX + EDP_SCL_CONN EDP SCL EDP GND EDP GND EDP TX 3 - +VCC_EDP_BKLT EDP Power 12V EDP_TX3N (or 5V) EDP TX 3 + +VCC_EDP_BKLT EDP Power 12V EDP_TX3P...
  • Page 20 IQ30 3.5" Embedded SBC User Manual Signal Name Description Pin Signal Name Description VCOM 3.8V LCDVDD LVDS VLCM_COM Power 3.3V (or 5V/12V) LVDS LCDVDD Power 3.3V (or 5V/12V) LCD_RST# RESET STBYB STBYB LVDS_TX0_DN_FPC TX 0 - LVDS_TX0_DP_FPC TX 0 + LVDS_TX1_DN_FPC TX 1 - LVDS_TX1_DP_FPC...
  • Page 21 1BChapter 2: Hardware Installation 2.2.10 J12: Touch 7" Signal Name Description TOUCH_USB_P1 USB D+ TOUCH_USB_N1 USB D- +TOUCH_PWR VCC 5V 2.2.11 J8: Micro SD card...
  • Page 22 IQ30 3.5" Embedded SBC User Manual Signal Name Description SD_D2 SD Data 2 SD_D3 SD Data 3 SD_CMD SD Command VREG_L5B_2P95 SD Power 2.95V/1.8V SD_CLK SD Clock System GND SD_D0 SD Data 0 SD_D1 SD Data 1 System GND System GND System GND System GND SD_DET_L...
  • Page 23 1BChapter 2: Hardware Installation 2.2.13 J4: USB 3.0 Type C Signal Name Description Signal Name Description USBC_TX0P_C USB 3.0 TX 0 + USBC_TX1P_C USB 3.0 TX 1 + USBC_TX0N_C USB 3.0 TX 0 - USBC_TX1N_C USB 3.0 TX 1 - VBUS_TYPEC VBUS 5V VBUS_TYPEC...
  • Page 24 IQ30 3.5" Embedded SBC User Manual Signal Name Signal Name Description Description VREG_USIM SIM Vreg 1.8V USIM_RESET SIM Reset USIM_CLK SIM Clock MSM_USIM_VPP SIM Power 1.8V USIM_DATA SIM Data SIM_DET_R SIM Detect 2.2.15 CN2; LTE Card...
  • Page 25 1BChapter 2: Hardware Installation Signal Name Description Pin Signal Name Description WWAN +V3.3_NGFF Power 3.3V WWAN +V3.3_NGFF Power 3.3V Full Card FULL_CARD_PWR_OFF# Power Off Wireless WWAN_DP WWAN D+ W_DISABLE# Disable RF WWAN_DM WWAN D- WAKE_ON_WAN#_3V3 Wake On WWAN Wireless Dynamic WWAN_DPR_3V3 W_DISABLE2# Disable...
  • Page 26 IQ30 3.5" Embedded SBC User Manual 2.2.16 SW1: Switch Signal Name Description VREG_L13A_1P8_BOOT1 Boot Vreg 1.8V VREG_L13A_1P8_BOOT1 Boot Vreg 1.8V BOOT_CFG_1 Boot Config 1 FORCED_USB_BOOT Forced USB Boot 2.2.17 CN12: DIDO Pin Signal Name Signal Name Description Description Digital In/Out DIO_5V Power 5V DOUT3_L...
  • Page 27 1BChapter 2: Hardware Installation 2.2.18 PANEL1: Front Panel Signal Name Signal Name Description Description +V5S +V5S +V3.3S +V3.3S PWR_BT_IN_N Power Button In ADJ+_R ADJ+ FP_RST_N Reset ADJ-_R ADJ- +V5A +V5A 2.2.19 CN13 & CN14 COLAY: RFID CN13 Signal Name Description RESET/VDD Reset/VDD 3.3V RFID_RXD_33V...
  • Page 28 IQ30 3.5" Embedded SBC User Manual 2.2.20 CN9: MCU JTAG Signal Name Description 3.3V_MCU MCU Power 3.3V C2DAT Data C2CK Clock /RESET Reset 2.2.21 5V1:5V Signal Name Description +V5S Power 5V 2.2.22 CN16: 3.3V Signal Name Description +V3.3S Power 3.3V 2.2.23 J1: Sensor...
  • Page 29 1BChapter 2: Hardware Installation Signal Name Description VREG_L14A_1P8 Sensor Power 1.8V LPI_I2C_3_SDA Sensor Data LPI_I2C_3_SCL Sensor Clock 2.2.24 CN19: CAN BUS Signal Name Description EXT_5V CAN Power 5V (Isolation) CANL_CONN CAN Low CANH_CONN CAN High GND_ISO_A CAN GND (Isolation) GND_ISO_A CAN GND (Isolation) GND_ISO_A CAN GND (Isolation)
  • Page 30 IQ30 3.5" Embedded SBC User Manual 2.2.26 COM1: COM Port #1 Signal Name Description FK_NDCD1 FK_NSIN1 FK_NSOUT1 FK_NDTR1 FK_NDSR1 FK_NRTS1 FK_NCTS1 FK_NRI1 2.2.27 J7: COM Port #2 Signal Name Description FK_NDCD2 FK_NDSR2 FK_NSIN2 FK_NRTS2 FK_NSOUT2 FK_NCTS2 FK_NDTR2 FK_NRI2 COM2_PWR Power 5V (or 3.3V)
  • Page 31 1BChapter 2: Hardware Installation 2.2.28 J3: USB2.0 #1 & #2 Connector Signal Name Description USB3VCC1 USB #1 Power 5V U2DN0 USB #1 D- U2DP0 USB #1 D+ USB3VCC2 USB #2 Power 5V U2DN1 USB #2 D- U2DP1 USB #2 D+ 2.2.29 J5: USB2.0 #3 Wafer Signal Name Signal Name...
  • Page 32 IQ30 3.5" Embedded SBC User Manual 2.2.30 J6 & J13 COLAY: USB2.0 #4 Wafer Pin Signal Name Signal Name Description Description USBVCC3 USB #6 Power 5V USBVCC3 USB #5 Power 5V 4_DM4_R USB #6 D- 4_DM3_R USB #5 D- 4_DP4_R USB #6 D+ 4_DP3_R USB #5 D+...
  • Page 33 1BChapter 2: Hardware Installation 2.2.32 Label: Function Signal Name Description +V3.3S OSD Power 3.3V SSD_LED# OSD LED KEY_VOL_UP Volume Up KEY_VOL_DN Volume Down HOME# Home KEY_FN4# KEY_FN5# 2.2.33 BT1: RTC Battery #1 Signal Name Description VRTC RTC Battery +3V System GND 2.2.34 BT2: RTC Battery #2...
  • Page 34 IQ30 3.5" Embedded SBC User Manual Signal Name Description System GND RTC_VBAT RTC Battery +3V System GND System GND 2.2.35 LAN1: LAN (With POE Option)
  • Page 35 1BChapter 2: Hardware Installation Signal Name Signal Name Description Description TRCT3 TRCT3 LAN1_MDI2- TRD3- LAN1_MDI2+ TRD3+ LAN1_MDI1+ TRD2+ LAN1_MDI1- TRD2- TDCT2 TDCT2 TRCT4 TRCT4 LAN1_MDI3+ TRD4+ LAN1_MDI3- TRD4- LAN1_MDI0- TRD1- LAN1_MDI0+ TRD1+ TRCT1 TRCT1 PoE_A1+ VCC1+ PoE_A1- VCC1- 44~57V PoE_A2+ VCC2+ PoE_A2- VCC2-...
  • Page 36 IQ30 3.5" Embedded SBC User Manual 2.2.38 J2: DMIC #2 Signal Name Description MICBIAS1 DMIC Bias 1.65~3.63V DMIC2_CLK DMIC #2 Clock DMIC2_DATA DMIC #2 Data 2.2.39 CN4:Speaker (Right) Signal Name Description ROUT-_L Speaker Right - ROUT+_L Speaker Right + 2.2.40 CN5:Speaker (Left) Signal Name Description LOUT-_L...
  • Page 37 1BChapter 2: Hardware Installation 2.2.42 P1: WIFI AUX Antenna Signal Name Description CH1_FEM_QM48858_ANT_3 WIFI CH1 2.2.43 P2: WIFI Main Antenna Signal Name Description CH0_FEM_QM48858_ANT_3 WIFI CH0 2.2.44 P3: NFC Antenna Signal Name Description NFC_TX1 NCF TX 1 NFC_TX2 NCF TX 2 NFC_TX2 NCF TX 2...

  • Page 38: Configuring Serial Port Settings In Android Os

    IQ30 3.5" Embedded SBC User Manual 2.3 Configuring Serial Port Settings in Android OS Serial COM Port can be configured for RS-232, RS-422 or RS-485. Winmate provides COM port settings application for Android OS. To configure serial port settings: 1. Settings >...
  • Page 39 1BChapter 2: Hardware Installation 3. Comport-Setting > Comport 1/ Comport 2/ Comport 3 * Select Comport 1/ Comport 2/ Comport 3 that you want to configure. 4. Comport 1 > RS232/RS422/RS485 * Configure Comport 1 settings...

  • Page 40: Chapter 3: Winmate Home Manager

    Chapter 3: Winmate Home Manager Every IQ30 series device comes with preinstalled APP named Winmate® Home Manager (WHM). This application lets the device manager to lock the launcher. When the launcher is locked the user can only use one application assigned by the device...

  • Page 41: How To Lock Applications

    2BChapter 3: Winmate Home Manager 3.1 How to Lock Applications Step 1  In the main APPS window, select the Home Manager APP and enable it.  Select Home Manager to start your settings.  Go to Password Manager and set your own password for this APP. The default password is “0000”.
  • Page 42 IQ30 3.5" Embedded SBC User Manual Step 4 Select “Restrict Home”, and then restart the Device. Step 6 System will ask to select “Just once” or “Always” to use this launcher, please select “Always”.

  • Page 43: How To Unlock Applications

    2BChapter 3: Winmate Home Manager The system will automatically start the application which you selected and lock it. Any time you press home key or back key, the system will go back to the same application which you have selected.

  • Page 44: How To Change Password

    IQ30 3.5" Embedded SBC User Manual Step 3 Restart the system and you will go back to the normal Launcher. 3.3 How to Change Password Step 1 Go to Password Manager and set your own password for this APP. Step 2 The default password is “0000”. Enter a new password in New Password field, and then tap Change Password.

  • Page 45: Chapter 4: Software Installation

    3BChapter 4: Software Installation Chapter 4: Software Installation This chapter describes how to install software IQ30-based computer.

  • Page 46: Android Debug Bridge Driver Installation

    IQ30 3.5" Embedded SBC User Manual 4.1 Android Debug Bridge Driver Installation You need to connect device to the computer with the USB Type-C cable. When using a USB cable (not supplied with your device), verify that the cable or cable packaging bears the “Certified USB™” mark to guarantee USB Type-C compliance.
  • Page 47 3BChapter 4: Software Installation 4.1.1 Disabling Driver Signature on Windows 8 1. Hold down the Windows key on your keyboard and press the letter C to open the Charm menu, and then click the gear icon (Settings). 2. Click Change PC Settings.
  • Page 48 IQ30 3.5" Embedded SBC User Manual 3. Click General. 4. Under Advanced Startup, click Restart Now. NOTE: In Windows 8.1, the ‘Restart Now’ button has moved to ‘PC Setting -> Update & Recovery -> Recovery.’ 5. After restarting, click Troubleshoot.
  • Page 49 3BChapter 4: Software Installation 6. Click Advanced Options. 7. Click Windows Startup Settings.
  • Page 50 IQ30 3.5" Embedded SBC User Manual 8. Click Restart. 9. After restarting your computer a second time, choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard. Your computer will restart automatically.
  • Page 51 3BChapter 4: Software Installation 10. After restarting, you will be able to install the ADB drivers normally; however, Windows will display a warning message. When the warning appears, click Install this driver software anyway. If you are unfamiliar with installing drivers, check out our Installing ADB driver tutorial for a step by step guide.
  • Page 52 IQ30 3.5" Embedded SBC User Manual 3. Select “Let me pick from a list of device drivers on my computer”. Click Next. 4. Select from your computer. 5. In the Update driver software window, click Show All Devices and then click Next.
  • Page 53 3BChapter 4: Software Installation 6. The system is looking for the driver folder. Click Browse. 7. Select the driver for your OS system. Click Open.
  • Page 54 IQ30 3.5" Embedded SBC User Manual 8. Windows Security window will pop up. This message is used to confirm whether the user wants to install the driver. Select Install this driver software anyway to continue. 9. When the installation is successfully completed you will see Android ADB Interface driver in the Update Driver Software window.

  • Page 55: Installing Android Debug Bridge (Adb)

    3BChapter 4: Software Installation 4.2 Installing Android Debug Bridge (ADB) For detailed Android Debug Bridge (ADB) information refer to Android Developers Platform: http://developer.android.com/tools/help/adb.html 1. Decompress adb.zip. Open ADB terminal and move into the adb archive. ADB Terminal window 2. Connect your device to the computer via USB OTG. System will ask you to confirm USB debugging.

  • Page 56: Ota Update Guide

    IQ30 3.5" Embedded SBC User Manual 4.3 OTA Update Guide OTA is a tool which can help you to update OS image. To receive Android OS image file contact our sales representatives. Once you get the image file follow the guideline below. 1.
  • Page 57 3BChapter 4: Software Installation 4. Tap Update Image 5. Make sure the file founded by the system is image update file. Tap OK.
  • Page 58 IQ30 3.5" Embedded SBC User Manual 6. Tap OK. Make sure the battery level is at least 50%. 7. Tap OK. Important: Do not disconnect the power source! Do not remove the battery!

  • Page 59: Os Image Update Guide

    3BChapter 4: Software Installation 8. After update the system will automatically restart. 4.4 OS Image Update Guide To receive OS image update guide please contact Winmate at https://www.winmate.com/...

  • Page 60: Chapter 5: Software Programming Guide

    IQ30 3.5" Embedded SBC User Manual Chapter 5: Software Programming Guide This chapter provides information about software programming tools for the IQ30 Motherboard.

  • Page 61: Android Programming Guide

    4BChapter 5: Software Programming Guide 5.1 Android Programming Guide All the programming guides can be found in the driver CD that comes in the package with the IQ30 motherboard. 5.1.1 ADB Installation Installation link: IQ30 CD\Android Documents and Files\PC_tool\adb\driver\adb.rar ADB Installation: 1.
  • Page 62 IQ30 3.5" Embedded SBC User Manual 5.1.2 GPIO General-purpose input/output (GPIO) is a generic pin on an integrated circuit whose behavior—including whether it is an input or output pin—is controllable by the user at run time. GPIO pins have no predefined purpose, and go unused by default. You can find all information about Android’s GPIO installation inside the Driver CD.
  • Page 63 4BChapter 5: Software Programming Guide 5.1.5 OTA Update Guide OTA is a tool which can help you to update OS image. To update Android OS image you need to receive image file. Once you get the image file follow the guideline below. OTA Update: 1.
  • Page 64 IQ30 3.5" Embedded SBC User Manual 4. Tap Update Image 5. Make sure the file founded by the system is image update file. Tap OK. 6. Tap OK. Make sure the battery level is at least 50%.
  • Page 65 4BChapter 5: Software Programming Guide 7. Tap OK. Important: Do not disconnect the power source! Do not remove the battery! 8. After update the system will automatically restart.

  • Page 66: Chapter 6: Technical Support

    IQ30 3.5" Embedded SBC User Manual Chapter 6: Technical Support This chapter includes pathway for technical support and Software Development Kit (SDK). Free technical support is available from our engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products.

  • Page 67: Software Developer Support

    5BChapter 6: Technical Support 6.1 Software Developer Support You can download SDK, derivers and other document from Winmate Download Center. Winmate Download Center https://www.winmate.com/ > Support > Download Center 6.2 Problem Report Form 3.5” Embedded SBC Customer name: Company: Tel.:...
  • Page 68 Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C www.winmate.com Copyright © Winmate Inc. All rights reserved.

Table of Contents