Speakers - HP EliteOne 800 G3 Maintenance & Service Manual

Speakers

The speakers are located at the bottom of the computer. Two separate speakers are each secured by two Torx
screws.
To remove the speakers:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the rear I/O cover (see
6. Disconnect the speaker cable from the system board (1).
7. Remove two Torx screws (2) that secure each speaker to the computer.
8. Remove speaker cable from the clips and routing path built into the chassis (3).
9. Remove the speakers from the computer.
To install the speakers, reverse the removal procedures.
When installing the speakers, make sure the rubber grommets are correctly installed in the speakers.
Preparing to disassemble the computer on page
Removing the rear port cover on page
Stands on page 20).
Access panel on page
Rear I/O cover on page
19).
21).
47).
19).
Speakers 55