HP EliteOne 800 G3 Maintenance & Service Manual page 60

To update SMBIOS information in Computer Setup:
1. Turn on or restart the computer.
2. Press
screen.
NOTE:
Esc when the display light turns green to access the utility.
3. Press
4. Go to Main > Set Machine Unique Data.
5. If necessary, press
6. Edit the fields listed. If the feature byte has data or is not editable, then it was not cleared and cannot be
edited.
System ID Setup Page
Setup Field Name
Product Name
Serial Number
SKU Number
Asset Tag
Feature Byte
Build ID
52 Chapter 4 Removal and Replacement Procedures
Esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the
If you do not press Esc
F10 to enter Computer Setup.
Ctrl+A to initiate edit mode.
Comment
Enter the Model name/number or marketing name.
Enter the Serial Number of Unit.
Enter the SKU or Product Number including Localization Code.
Enter the 18-byte identifier assigned to the computer.
Enter the Feature Byte string. The feature byte string is case sensitive.
The label includes spaces after every four characters. You can enter or ignore these
spaces – their only purpose is to help with data entry. There is a character
limitation of 40 bytes per line. When you reach this limit, go to the next line to
continue data entry. BIOS ignores the spaces and lines.
If you make an error during data entry, the data will not validate, and the computer
asks you to correct your data input.
The Build ID of the unit.
at the appropriate time, you must restart the computer and again press
Label
Flexbuild
Support
Support
Support
Flexbuild
Flexbuild